PUBLIC MARKS with tags linux & iscsi

Imagine you have a machine with all of its disk full and another with unused gigabytes, and you don't want to move the data from one to the other. Why not using the second's disk on the first, you can do it with iSCSI but you can do it with ATA over Ethernet (AoE) too. It's the second method I'll explain in this article. All of this was made with two computers running Debian Etch.

This is a document about how to set up XEN and iSCSI on 3 Debian Stable (3.1 / Sarge) machines so that you can have a virtual host that can be migrated live between 2 of the machines. The third machine will be the common disk for the virtual machine that is seen via the 2 machines running XEN. I have assumed you have some knowledge of Linux specifically Debian, but not limited to. You may need to solve some dependencies that I have left out by yourself. I can't think of everything, and I didn't start with completely empty machines.

How do I format and connect to an iSCSI Volume under Debian / Ubuntu Linux?

Setting Up An iSCSI Environment On Linux Nowadays, the iSCSI technology is quite popular in the storage world. This article shows an iSCSI demo environment which consists of one Debian Linux host and one Netapp Filer.We try to show the most important features of this protocol. 1. What is iSCSI? It is a network storage protocol above TCP/IP. This protocol encapsulates SCSI data into TCP packets. iSCSI allows us to connect a host to a storage array via a simple Ethernet connection (tape drive). This solution is cheaper than the Fibre Channel SAN (Fibre channel HBAs and switches are expensive). From the host view the user sees the storage array LUNs like a local disks. iSCSI devices should not be confused with the NAS devices (for example NFS). The most important difference is that NFS volumes can be accessed by multiple hosts, but one iSCSI volume can by accessed by one host. It is similar to SCSIi protocol: usually only one host has access to one SCSI disk (the difference is the cluster enviroment). The iSCSI protocol is defined in the RFC3720 document by the IETF (Internet Engineering Task Force).

Setting Up An iSCSI Environment On Linux Nowadays, the iSCSI technology is quite popular in the storage world. This article shows an iSCSI demo environment which consists of one Debian Linux host and one Netapp Filer.We try to show the most important features of this protocol. 1. What is iSCSI? It is a network storage protocol above TCP/IP. This protocol encapsulates SCSI data into TCP packets. iSCSI allows us to connect a host to a storage array via a simple Ethernet connection (tape drive). This solution is cheaper than the Fibre Channel SAN (Fibre channel HBAs and switches are expensive). From the host view the user sees the storage array LUNs like a local disks. iSCSI devices should not be confused with the NAS devices (for example NFS). The most important difference is that NFS volumes can be accessed by multiple hosts, but one iSCSI volume can by accessed by one host. It is similar to SCSIi protocol: usually only one host has access to one SCSI disk (the difference is the cluster enviroment). The iSCSI protocol is defined in the RFC3720 document by the IETF (Internet Engineering Task Force).

This is a ultimate guide how to setup your iSCSI target on a Linux FC4 machine.