PUBLIC MARKS from falko with tags ubuntu & raid

This tutorial shows how to install Ubuntu 12.10 on the btrfs filesystem (with RAID1) on a Hetzner server with two hard drives. While Hetzner's installimage tool doesn't list btrfs as a supported filesystem and only supports software RAID with /dev/md devices, it is still possible to achieve this setup and use the built-in RAID support in btrfs instead of using /dev/md devices.

This guide shows how to work with the btrfs file system on Linux. It covers creating and mounting btrfs file systems, resizing btrfs file systems online, adding and removing devices, changing RAID levels, creating subvolumes and snapshots, using compression and other things. btrfs is still marked as experimental, but all those features make it a very interesting and flexible file system that should be taken into consideration when you look for the right file system.

This guide explains how to set up software RAID1 on an already running LVM system (Ubuntu 11.10). The GRUB2 bootloader will be configured in such a way that the system will still be able to boot if one of the hard drives fails (no matter which one).

This tutorial shows how to set up network RAID1 with the help of DRBD on two Ubuntu 11.10 systems. DRBD stands for Distributed Replicated Block Device and allows you to mirror block devices over a network. This is useful for high-availability setups (like a HA NFS server) because if one node fails, all data is still available from the other node.

This guide explains how to set up software RAID1 on an already running Ubuntu 10.04 system. The GRUB2 bootloader will be configured in such a way that the system will still be able to boot if one of the hard drives fails (no matter which one).

This guide explains how to set up software RAID1 on an already running LVM system (Ubuntu 10.04). The GRUB2 bootloader will be configured in such a way that the system will still be able to boot if one of the hard drives fails (no matter which one).

This tutorial shows how to combine four single storage servers (running Ubuntu 9.10) to a distributed replicated storage with GlusterFS. Nodes 1 and 2 (replication1) as well as 3 and 4 (replication2) will mirror each other, and replication1 and replication2 will be combined to one larger storage server (distribution). Basically, this is RAID10 over network. If you lose one server from replication1 and one from replication2, the distributed volume continues to work. The client system (Ubuntu 9.10 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

This tutorial shows how to set up a high-availability storage with two storage servers (Ubuntu 9.10) that use GlusterFS. Each storage server will be a mirror of the other storage server, and files will be replicated automatically across both storage servers. The client system (Ubuntu 9.10 as well) will be able to access the storage as if it was a local filesystem. GlusterFS is a clustered file-system capable of scaling to several peta-bytes. It aggregates various storage bricks over Infiniband RDMA or TCP/IP interconnect into one large parallel network file system. Storage bricks can be made of any commodity hardware such as x86_64 servers with SATA-II RAID and Infiniband HBA.

This guide describes how to install Ubuntu (Ubuntu+GNOME) or Kubuntu (Ubuntu+KDE) 6.06.1 LTS (Dapper Drake) on a single or a multi-boot RAID system. It is meant as a variation of Ubuntu Wiki FakeRAID HowTo document, but digested and with minimum commentary. Its goal is to allow new Ubuntu users to complete an entire installation within 30 minutes, almost entirely by copy and paste.