PUBLIC   marks

PUBLIC MARKS with tag jaunty

Sponsorised links

24 July 2009

08 June 2009

ADSL no Debian

by tadeufilippini (via)
ADSL NO DEBIAN Configurar uma conexão adsl (Velox, Speedy etc) no Linux é muito fácil e varia de uma distro para outra. Há distribuições que possuem ferramentas gráficas para tal, como a Kurumin e a Mandriva, mas também é possível configurá-las pelo terminal e é por esse método que vamos fazer a configuração. O procedimento serve tanto para o Ubuntu quanto para as distribuições baseadas no Debian, pelo menos nas que eu testei... Abra o terminal e digite sem as aspas " sudo pppoeconf " (se você estiver usando o Debian provavelmente será necessário instalar o pacote, digite no terminal " sudo apt-get install pppoeconf " com o cd de instalação no drive), digite a sua senha de usuário e vai aparecer uma janela dizendo que detectou tantas interfaces de rede (eth0, eth1, etc para quantas placas de rede você tenha na máquina) e se você deseja configurar a conexão na interface de rede selecionada e, selecionada a interface de rede onde o modem adsl está conectado, vai aparecer uma janela dizendo que foi detectado o concentrador de acesso (no caso, o modem adsl) e assim ir para a tela de login; digite o seu nome de usuário e senha do seu provedor de acesso e vá dando ENTER e concordando com as perguntas que forem feitas, escolhendo ao final da configuração que você quer que a conexão seja iniciada no boot da máquina. Isso vai permitir que a sua conexão esteja sempre ativa. Reinicie a máquina e pronto, já estará conectado e navegando.

internet só após um novo pppoeconf no ubuntu 9.04

by tadeufilippini
não foi possível .coloquei a linha no final como está escrito.não funcionou.agora escrevo navegando com um liveCD ( kurumin NG ). no ubuntu instalado aparecem três possibilidades : eth0 pan0 virbr0.no kurumin e em outro ubuntu uma só : eth0.confuso. no ubuntu jaunty ,que está como "aplicativo" do windows , no outro computador as mesmas duas que foram citadas na pergunta: eth0 pan0...mas acesso a internet e ela inicia logo com o boot.há uma diferença dos dois "ubuntu 9.04 " : o que funciona é ubuntu 9.04 kernel 2.6.28-11-generic ..o que não tem acesso a internet é 2.6.28-12-generic.poderia ser isso ? no upgrade ( do intrepid para o jaunty) quebrou um pacote que foi removido : "transmission-gtk".houve problemas com dois outros : "nscd " e "libikipi".não sei o que fazer .parece que fracassei..fiquei horas durante a atualização tentando não errar e ...colo agora o que fiz .peço desculpas por tantas palavras..mas gostaria de usar o meu ubuntu que mantenho desde o gutsy .ubuntu para todos. #!/bin/sh -e # # rc.local # # This script is executed at the end of each multiuser runlevel. # Make sure that the script will "exit 0" on success or any other # value on error. # # In order to enable or disable this script just change the execution # bits. # # By default this script does nothing. # ifconfig eth0 up exit 0 p.s. saudações do ipiranga tadeu filippini

Sponsorised links

07 June 2009

04 June 2009

Ubuntu 9.04 Jaunty Jackalope para baixar

by tadeufilippini
On 05.04.09 Arlindo SantAnna escreveu: May 4th, 2009 at 11:05 am Using Mozilla Firefox Mozilla Firefox 3.0.10 on Windows Windows XP Bom dia André: Estou com um problema enorme com o ubuntu 9.04. Fiz a instalação com as versões amd64 e i386 e o problema se repete. Executei o comando pppoeconf para conexão com a internet, fiz todos os downloads atualizando todos pacotes,naveguei pela internet e depois fiz a instalação dos drivers restritos.Aí o sistema pede para ser reiniciado. Quando volta não consigo mais a conexão da internet. Quando da intalação do pppoeconf pedi conexão no inicio de cada seção. Não funciona o pon dsl-provider. Fico totalmente vendido, sem poder fazer mais nada. Isto não acontecia na versão 8.10. Sabe de alguma dica? Agradeço antecipadamente. SantAnna

03 June 2009

Wired troubleshooting

by tadeufilippini
Wired troubleshooting If you have a network connection which is not working properly, you can use a few tools to help diagnose what the problem is. Most of the tools in this section require use of the Terminal, which you can open by pressing Applications → Accessories → Terminal. Get information about the current connection ifconfig is intended to allow you to change the settings of your network connections, but it can also be used to list information about the current connection. 1. Press Applications → Accessories → Terminal to open a Terminal 2. Type ifconfig eth1 in the Terminal and press Enter, replacing eth1 with the name of your network interface if it is different. * inet addr gives the current IP address of the connection * HWaddr gives the MAC address of your network device

Chapter 5. Troubleshooting

by tadeufilippini
Table of Contents Wired troubleshooting Get information about the current connection Check if a connection is working properly Wireless troubleshooting Check that the device is on Check for device recognition Using Windows Wireless Drivers Check for a connection to the router Check IP assignment Check DNS IPv6 Not Supported

DSL

by tadeufilippini
Ubuntu Documentation > Ubuntu 9.04 > Internet and Networks > Connecting > DSL DSL 1. Right click the NetworkManager icon and click Edit connections... 2. Click DSL. 3. Click Add.

Documentation for Ubuntu 9.04

by tadeufilippini
Documentation for Ubuntu 9.04 This site is where you can find the official documentation developed and maintained by the Ubuntu Documentation Project. This page contains documentation for Ubuntu 9.04, the latest stable version, released in April 2009. If you can't find what you are looking for here, try the excellent source of community contributed documentation.

02 June 2009

13 May 2009

29 April 2009

26 April 2009

Ubuntu -- Package Search Results -- unetbootin

by tadeufilippini (via)
Package unetbootin * jaunty (utils): installer of Linux/BSD distributions to a partition or USB drive [universe] 304-1: amd64 i386 * karmic (utils): installer of Linux/BSD distributions to a partition or USB drive [universe] 304-1: amd64 i386

25 April 2009

20 April 2009

26 October 2007

Upgrading your existing Ubuntu installation | Ubuntu

by tadeufilippini & 3 others
Upgrading using the alternate CD/DVD Use this method if the system being upgraded is not connected to the Internet. 1. Download and burn the alternate installation CD. 2. Insert it into your CD-ROM drive. 3. A dialog will be displayed offering you the opportunity to upgrade using that CD. 4. Follow the on-screen instructions. If the upgrade dialog is not displayed for any reason, you may also run the following command using Alt F2: gksu "sh /cdrom/cdromupgrade" Or in Kubuntu run the following command using Alt F2: kdesu "sh /cdrom/cdromupgrade"

PUBLIC TAGS related to tag jaunty

no tag

Sponsorised links